Champward PU Floor  
  PU Primer  
 

PU Primer (MDI Base) CM-200
    
Full MDI base Polyurethane resin, one-component, Primer for PU Waterproofing Paint, PU Sealant, PU
    Sports Surface Coating, to strengthen adhesiveness between concrete substrate and surface polymer coating.


 
 

PU Primer CW-200
   
PU  resin (TDI Base), one-component, Primer for PU Waterproofing Paint, PU Sealant, PU Sports Surface
    Coating, PU Floor Coating, to strengthen adhesiveness between concrete substrate and surface polymer
    coating.


 
  Cushioned PU Floor Coating  
 

PU Floor Base Coating CW-4202(Red)/CW-4502(Green)
    Two component  polyurethane coating, chemical reaction curing to be
seamless highly tough and flexible
    synthetic floor with safety and hygiene functions.  Excellent wear and abrasion resistance.

    CW-4*02A : CW-4*02B = 2 : 1.


 
  PU Floor Coating  
 

PU Floor Coating CW-4101(Gray)/CW-4201(Red)/CW-4401(Yellow)/CW-4501(Green)
    Two component polyurethane coating, chemical reaction curing to be
seamless highly tough and flexible
    synthetic floor with safety and hygiene functions.  Excellent wear and abrasion resistance.

    CW-4*01A : CW-4*01B = 1 : 1.


 
  PU Finish  
 

Non-Yellow PU Matt Finish CW-8**4
    
Two component PU coating, for Indoor sport surface.  Hardwearing and durable high quality eggshell finish.


 
  Champward Polyurea  
  PU Primer  
  PU Primer (MDI Base) CM-200  
 

    Full MDI base Polyurethane resin, one-component, Primer for PU Waterproofing Paint , PU Sealant, PU
    Sports Surface Coating, to strengthen adhesiveness between concrete substrate and surface polymer coating.


 
  Polyurea Coating  
  Polyurea Coating CU-4101(Gray)/CU-4201(Red)/CU4501(Green)  
 

    MDI based spray system.  Two components are heated to 70 to 80°C to lower viscosity and ensure a good  
    mixing, the mixing ratio is 1 : 1 by volume.  Fast
reaction with curing  times of 5 - 10 seconds.

 
   It is an excellent choice to coat pipes, industrial floors, automotive truck-beds, roof coatings, etc. as they need
    to be put back into service as soon as possible  or any post cure is impossible or too expensive.


 
  PU Finish  
 

Non-Weathering Finish CW-6**8
    
Two component coating for epoxy flooring.  Protective coating for the out door epoxy flooring or similar
    high-hardness masonry or concrete floors.  Non-yellowing and excellent  weathering stability.