¡@ |
¡@ |
¡@ |
¡@ |
PU
Waterproofing can further be subdivided into four types: |
¡@ |
¡@ |
|
Champward CW-101 FP System |
¡@ |
For
Roofing, Exposure Type |
¡@ |
Thickness of 2 - 5 mm
water impermeable, long-lasting elastic waterproofing membrane. Priming by PU primer, mixing two component PU resins and evenly spread onto substrate, after curing, colored finish coating to
protect the surface from sun-light deterioration. Suitable for any concrete
substrate. |
¡@ |
¡@ |
¡@ |
¡@ |
|
Champward CW-102 WP System |
¡@ |
For Outside Walls,
Exposure Type |
¡@ |
Use
non-sagging PU coating, which can be applied to vertical or
sloping substrate without flow ability and required thickness of waterproofing membrane can reached, and must be protected by sunlight-stable finish. |
¡@ |
¡@ |
¡@ |
¡@ |
|
Champward CW-103 IP System |
¡@ |
For
Roofing, Covered Type |
¡@ |
Waterproofing membrane
does not explosive and being protected by cement-based materials or tiles. |
¡@ |
¡@ |
¡@ |
¡@ |
¡@ |
¡@ |
|
Champward CW-104 VP System |
¡@ |
For
Outside Walls, Covered Type |
¡@ |
Use non-sagging PU
coating and protected by cement based materials or tiles. Suitable for underground constructions or walls exterior
waterproofing. |
¡@ |
¡@ |
¡@ |